WLB92 Industrial LED Light Bar (AC Quick Disconnect) -- Datasheet

Datasheet

Banner's WLB92 is a very bright LED ﬁxture/luminaire that features an even light output for a no glare 'glow'. The WLB92 series is

designed for a wide variety of environments and applications, including but not limited to work stations, machine lighting, and low

bay lighting. The WLB92 uses advanced LED lighting technology to provide a high-quality and maintenance free industrial lighting

solution.

• Increase worker productivity and ergonomics with bright, high-quality, uniform light

•

Exceptionally energy efﬁcient for overall cost savings

• Durable light stands up to your environment with a rugged metal housing and shatter-resistant window

• Easy installation with snap clips

• Intensity can be controlled from 15% to 100% using the attached knob

• Rated for use at 120 V ac in North America

• Rated for use at 100 V ac to 277 V ac outside North America

These AC quick disconnect models can be used as continuous run models that can be cascaded or "daisy-chained" together for a

continuous length of lighting using a double-ended accessory cordset (see Accessories on p. 5). Each light bar can be turned

on, off, or dimmed independently of the other lights, upstream or downstream, in the chain.

WLB92 Industrial LED Light Bars are available in several conﬁgurations including different lengths and cord options. WLB92 (AC)

Daylight White and Warm White models come with a ﬁve year, limited warranty. To view or download the latest technical

information about this product, including speciﬁcations,

dimensions, accessories, and wiring, see www.bannerengineering.com.

Important: Read the following instructions before operating the light. Please download the complete WLB92

Industrial LED Light Bar (AC Quick Disconnect) technical documentation, available in multiple languages, from

www.bannerengineering.com for details on the proper use, applications, Warnings, and installation instructions

of this device.

Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde

www.bannerengineering.com toda la documentación técnica de los WLB92 Industrial LED Light Bar (AC Quick

Disconnect), disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las

instrucciones de instalación de estos dispositivos.

Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation

technique complète des WLB92 Industrial LED Light Bar (AC Quick Disconnect) sur notre site

www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de sécurité

et les instructions de montage.

WLB92 Industrial LED Light Bar (AC Quick

Disconnect)

Original Document

183984 Rev. I

3 December 2019

183984

Models

Plug Type (1.8 m cable)

B = North & Central America, Japan, Taiwan

D = India, Sri Lanka, Nepal, Namibia

EF = France, Belgium, Slovakia, Tunisia, Germany,

Austria, Netherlands, Spain,

S. Korea

G = UK, Ireland, Cyprus, Malta, Malaysia,

Singapore, Hong Kong, Vietnam

I = Australia, New Zealand, Papua New Guinea,

Argentina, China

N = Brazil, South Africa

C = AC connector with ﬂying leads

Blank = no power cord

Connector

QM = Custom Quick

Disconnect (QD) *

* QD models require a mating cordset

C = Cascadable

Cascadable

550

1100

Lighted

Length (mm)

550

PB = Switch,

Dimming

Knob

Control

Z = AC

Voltage

Family

WLB92

Blank = Daylight White

WW = Warm White

G = Green

R = Red

Y = Yellow

B = Blue

LED Color

Installing the WLB92 Industrial LED Light Bar (AC Quick Disconnect Models)

Figure 1. Attaching the snap brackets (step 6) Figure 2. Installing the cascade cover (step 9)

1. Attach the snap brackets to the light.

2. Select a suitable horizontal or vertical dry mounting location. The maximum distance to the power receptacle cannot be

farther than the length of the power cord used.

3. Place the light in the mounting location and mark the positions of the snap bracket mounting holes.

4. Remove the brackets from the light.

5. Drill the holes and use appropriate screws to secure the snap bracket to the mounting location.

6. Snap the light onto the brackets.

7. When installing cascading lights, repeat steps 1 through 6 to mount additional lights. See the application note in the

Speciﬁcations

section for the maximum cascaded lights and maximum allowed cable run when choosing mounting

locations.

8. Connect the cascaded lights together using an applicable cordset (see Accessories on p. 5).

9. Install the supplied cover over the output connector on the last light in the chain.

10. Plug the power cord from the ﬁrst light into the wall outlet. A 3 m (10 ft) cord is available for applications requiring a longer

cord for cabinet installations.

WLB92 Industrial LED Light Bar (AC Quick Disconnect)

2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 183984 Rev. I

CAUTION: To reduce the risk of ﬁre,

electrical shock, or injury to personal:

• Use only insulated staples or plastic ties to secure cords

• Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the

wall

• Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are

able to be read during relamping

• Do not recess into ceilings or sofﬁts

• Do not conceal the cords. The National Electrical Code (NEC) does not permit cords to be concealed

where damage to insulation may go unnoticed. To prevent ﬁre danger, do not run cords behind walls,

ceilings, sofﬁts, or cabinets where it may be inaccessible for examination. Cords should be visually

examined periodically and immediately replaced when any damage is noted.

CAUTION: To Reduce the Risk of Fire. Do not install the 550 mm models in a compartment smaller than 305

mm by 305 mm by 675 mm. Do not install the 1100 mm models in a compartment smaller than 305 mm by 305

mm by 1350 mm.

Speciﬁcations

Supply Voltage

Nominal voltage: 120 V ac, 60 Hz in North America

Nominal voltage: 100 V ac to 277 V ac, 50/60 Hz outside North America

Power factor: > 0.95 at 120 V ac and > 0.90 at 230 V ac

Total harmonic distortion (THD): < 20%

See electrical characteristics on product label

Supply Current

Lighted Length

(mm)

Max. Current Draw

(A) at 90 V ac

Typical Current Draw (A)

120 V ac 230 V ac

550 0.425 0.270 0.135

1100 0.850 0.540 0.250

Supply Protection Circuitry

Protected against transient voltages

Light Characteristics

Daylight White and Warm White Efﬁcacy: 110 lumens/watt typical at 120 V

ac at 25 °C (77 °F)

CRI: 82, typical

Color Dominant Wavelength

(nm) or Color

Temperature (CCT)

Lighted Length Lumens

(Typical at 25 °C)

550 mm 1100 mm

Daylight

White

5000 K (±300 K) 3510 7150

Warm

White

3000 K (+225 K, -125 K) 3510 7150

Green 525 nm 1430 2975

Red 625 nm 745 1545

Yellow 590 nm 620 1295

Blue 470 nm 405 840

Test Data

LM-79, LM-80, TM-21

Environmental Rating

IEC IP40

LED Lifetime

Lumen Maintenance - L

When operating within speciﬁcations, output will decrease less than 30%

after 50,000 hours.

Switch/Dimming Knob

On/Off Switch and dimming knob, dimmable to 15% intensity

Construction

Anodized aluminum housing, polycarbonate window and end caps, and

stainless steel mounting brackets

Spacing Criterion

Vertical: 1.20

Horizontal: 1.32

Connections

Integral custom quick disconnect (connecting cordset required)

Mounting

Snap mount brackets included (two for the 550 mm model; three for the

1100 mm model)

Compatible with integral 45 mm aluminum framing mounting slots

Operating Temperature

550 Lighted Length: –35 °C to +50 °C (–31 °F to +122 °F) for 24 hours per

day for 5 years of operation

1100 Lighted Length: –40 °C to +45 °C (–40 °F to +113 °F) for 16 hours per

day for 5 years of operation; or –40 °C to +35 °C (–40 °F to +95 °F) for 24

hours per day for 5 years of operation

Storage Temperature

–40 °C to +70 °C (–40 °F to +158 °F)

Vibration and Mechanical Shock

Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak amplitude per IEC

60068-2-6

Shock: 5G 11 ms duration, half sine wave per IEC 60068-2-27

Application Notes

When connecting continuous run/cascadable lights in series, see table for

maximum number of units. Do not exceed a maximum wiring distance of

100 m (328 ft) in the main power cable and any cascading cables.

Maximum Unit Limit (when using both model lengths)

550 mm Lights 1100 mm Lights

10 0

8 1

6 2

4 3

2 4

0 5

For example, if you use four 550 mm lights, you may add up to three 1100

mm lights within the same continuous run.

Certiﬁcations

WLB92 Industrial LED Light Bar (AC Quick Disconnect)

P/N 183984 Rev. I www.bannerengineering.com - Tel: + 1 888 373 6767 3

Spacing Criteria (SC)

The spacing criteria is the ﬁxture-spacing-to-mounting-height ratio and aids in laying out a pattern of

ﬁxtures. Multiply the spacing

criteria by the mounting height to get the maximum ﬁxture spacing that still provides even illumination (no shadowing between

ﬁxtures).

Luminaire Spacing = SC × Height to Illuminated Plane

The mounting height is the distance from the ﬁxture to the surface you are lighting.

Performance Curves

550 mm Models - Daylight White and Warm White

180°

(candela)

1100

917

733

550

367

183

367

550

733

100 lux

75 lux

50 lux

40 lux

30 lux

20 lux

Mount height of 3 meters (3 m)

10 lux

5 lux

917

1100

170°

160°

150°

140°

130°

120°

110°

100°

90°

80°

70°

60°

50°

40°

30°

20°

10°

0°

Polar Candela Distribution Isolux Pattern

Center Beam (lux)

3,630 lux

0.5 m

1.0 m

1.5 m

2.0 m

2.5 m

3.0 m

Vertical Spread: 94.2°

Horizontal Spread: 133.6°

1.08 m 2.33 m

2.15 m 4.67 m

3.23 m 7.00 m

4.30 m 9.33 m

1,117 lux

496 lux

279 lux

5.38 m 11.67 m

179 lux

6.45 m 14.00 m

124 lux

Beam Width (m)

Illuminance at a Distance

Vert. Horiz.

0 m

3 6

Vertical Angle:

0° Vertical 90° Horizontal

50% max.

candela

1100 mm Models - Daylight White and Warm White

180°

(candela)

2200

1833

1467

1100

733

367

733

1100

1467

200 lux

150 lux

100 lux

75 lux

50 lux

25 lux

Mount height of 3 meters (3 m)

10 lux

5 lux

1833

2200

170°

160°

150°

140°

130°

120°

110°

100°

90°

80°

70°

60°

50°

40°

30°

20°

10°

0°

Polar Candela Distribution Isolux Pattern

Center Beam (lux)

5,060 lux

0.5 m

1.0 m

1.5 m

2.0 m

2.5 m

3.0 m

Vertical Spread: 96.7°

Horizontal Spread: 132.3°

1.12 m 2.26 m

2.25 m 4.53 m

3.37 m 6.79 m

4.50 m 9.06 m

1,870 lux

932 lux

524 lux

5.62 m 11.32 m

335 lux

6.74 m 13.58 m

233 lux

Beam Width (m)

Illuminance at a Distance

Vert. Horiz.

0 m

3 6

Vertical Angle:

0° Vertical 90° Horizontal

50% max.

candela

Dimensions

104

[4.1]

[3.8]

[1.8]

[.56]

WLB92 Industrial LED Light Bar (AC Quick Disconnect)

4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 183984 Rev. I

Model L1 L2

WLB92ZC...550PBQM 543 mm (21.4 in) 651 mm (25.6 in)

WLB92ZC...1100PBQM 1098 mm (43.2 in) 1206 mm (47.5 in)

Accessories

Wall Plug Cordsets

Model Plug Type Countries Wire Gauge Length Dimensions

LQMAC-306 Flying Leads

18 AWG

1.8 m (6 ft)

LQMAC-306B NEMA 5-15 grounded (IEC Type B)

United States, Canada,

Japan, Puerto Rico, Taiwan

LQMAC-306D BS 546 (IEC Type D) India

LQMAC-306EF CEE 7/7 (IEC Type E or F)

Germany, France, South

Korea, The Netherlands,

Poland, Spain, Turkey

LQMAC-306G BS 1363 (IEC Type G)

United Kingdom, Ireland,

Singapore, Vietnam

LQMAC-306I AS/NZS 3112 (IEC Type I)

China, Australia, New

Zealand

LQMAC-306N NBR 14136 (IEC Type N) Brazil

LQMAC-310B NEMA 5-15 grounded (IEC Type B)

United States, Canada,

Japan, Puerto Rico, Taiwan

3 m (10 ft)

For other lengths of the LQMAC-306 cables, contact the factory. LQMAC-310B is available for applications requiring a 3 m (10 ft)

cord for cabinet installation. For complete listing of countries and wall plug types, see the IEC World Plugs website.

Continuous Run/Cascade Cordsets

Model Length Style Wire Gauge Dimensions

LQMAEC-3005SS 0.15 m (0.5 ft)

Male straight/Male straight 18 AWG

LQMAEC-301SS 0.31 m (1 ft)

LQMAEC-303SS 0.91 m (3 ft)

LQMAEC-306SS 1.83 m (6 ft)

LQMAEC-312SS 3.66 m (12 ft)

LQMAEC-320SS 6.1 m (20 ft)

LQMAEC-330SS 9.14 m (30 ft)

Brackets

LMBWLB92CLIP

• Snap clip allows for tool-less installation

•

Stainless steel

• Includes four snap clips, four screws, and

two insulator caps

Ø6.5

The LMBWLB92CLIP bracket replaces the bracket that ships

with the WLB92 light.

WLB92 Industrial LED Light Bar (AC Quick Disconnect)

P/N 183984 Rev. I www.bannerengineering.com - Tel: + 1 888 373 6767 5

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for ﬁve years on daylight white and warm white models and one year on all other

models following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is

found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner

product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO

BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES

RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,

STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the

product is identiﬁed as not intended for such purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will

void the product warranties. All speciﬁcations published in this document are subject to change; Banner reserves the right to modify product speciﬁcations or update documentation at

any time. Speciﬁcations and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

FCC Part 15 and CAN ICES-3 (B)/NMB-3(B)

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the manufacturer.

Mexican Importer

Banner Engineering de Mèxico, S. de R.L. de C.V.

David Alfaro Siqueiros 103 Piso 2 Valle oriente

San Pedro Garza Garcia Nuevo Leòn, C. P. 66269

81 8363.2714

WLB92 Industrial LED Light Bar (AC Quick Disconnect)